} Chemical Tests

Chemical Tests

We are able to provide following Chemical Analysis.

  • Chemical analysis of steel , copper alloys, aluminium alloys and lead alloys
  • Determination of carbon and sulphur in steel and nickel alloys
  • Determination of sodium and potassium in minerals, ores and rocks, water, fibre glass yarn and others.
  • Determination of manganese, phosphorous, nickel, molybdenum, copper, titanium, iron, tin, chromium, zinc, antimony, bismuth, lead, cobalt. In steels, copper base, aluminium base and titanium alloys
  • Determination of copper and lead by electro-gravimetry in steels, copper and aluminium alloys.

Arc Emission Spectrometer

Chemical Analysis by Arc Emission Spectrometer

  • Ferrous Base:

Plain carbon and low alloy Steel, Stainless Steel, Tool Steel, Chilled Cast Iron and High Mn Steel

  • Non Ferrous Base:

Aluminium, Aluminium Bronze , Phosphor Bronze, Pure Copper, Lead  and Solder

 

C&S Analyzer and ONH Analyzer

C & S Analyzer :

  • C and S in Metals & Ferro alloys

ONH Analyzer :

  • O, N and H in Ferrous Base materials
  • O in Copper Base materials
  • O, N and H in Titanium base materials

 

Electrolytic Analyzer

Electrolytic Analyzer 

  • Cu, Pb

 

Flame Photometer

Flame Photometer : 

  • Na,K, Ca, Li

 

Spectrophotometer

spectrophotometer

 

Spectrophotometer

  • Al, Bi, Co, Cd, Cu, Cr, Fe, Mn, Mo, Ni, Pb, P, Sb, Si, Ti, V, Zn, W

 

Wet Chemical Section

Chemical Lab

Analysis of Metals and Alloys by Wet Conventional Method

  • Ferrous Materials: Plain carbon steels, Low alloy steels, stainless steels, tool steels, Gray cast iron, SG iron and austenitic ductile iron and others
  • Ferro Alloys: Ferro Silicon. Ferro Manganese , Ferro Chrome, Silico Manganese, Ferro Molybdenum , Ferro Vanadium , Ferro Titanium, Ferro Aluminum, Ferro Magnesium 
  • Non Ferrous Materials: Aluminium Alloys, Copper Alloys, Nickel Alloys, Tin and Lead Alloys, Zinc Alloy, Cobalt alloy, Brazing Alloys.

Ores, Minerals, Rocks and Mineral based materials:

Chemical Analysis, Identification of Minerals, Petrography

  • Plating Solutions: Chemical analysis 
  • Coal, Coke and Graphite: Moisture content, Volatile Combustible matter, Ash content, Fixed carbon, Sulphur
  • Water: Total Hardness, Ca, Mg, Fe, Mn, Total dissolved solids, Suspended solids, Chloride, Sulphate, Alkalinity Total, P Alkalinity, Mo Alkalinity, pH, Conductivity
  • Lubricants: Viscosity, Flash Point, Fire Point, Specific gravity
  • Polymers: Identification, Density, Ash Content
  • Rubber: Resistance to liquids and high temperature- change in volume, change in dimension
  • Glass Fibre Yarn: Alakalies, pH of water extract

Civil (Building Materials)

Chemical analysis for following groups

  • ADMIXTURE (Ash Content, Chloride Content, Dry Material Content, pH, Relative Density)
  • CEMENT-OPC,PSC,PPC (Insoluble Residue, Cao Content, Chloride, Silica, LOI, Magnesia, Sulphuric anhydride, Combined Oxides)
  • CERAMIC TILES (GLAZED and UNGLAZED)- Chemical Resistance
  • Fly Ash – CaO, Alumina, Chloride, Iron oxide, LOI, Magnesia, Silica, Sulphuric anhydride
  • GGBS- (Insoluble Residue, Cao Content, Chloride, LOI, Magnesia, Sulphuric anhydride, Combined Oxides)
  • Filtration Media(Sand & gravel)- LOI and Alumina

Water For Construction Purpose

Parameter such as Acidity, Alkalinity, Chloride content as Cl-, Inorganic Solids(Fixed Residue), Organic Solids(Volatile Residue), pH value, Sulphate content as SO3, Suspended Matter,